Low pressure on heater

Pool pumps, pool filters and the plumbing of
swimming pools. Sand filters, cartridge filters,
fabric filters and alternative filter media.
Post Reply
Rossk
I'm new here
I'm new here
Posts: 1
Joined: Sun 13 Sep, 2020 04:02
My Pool: 15ft above ground pool, eco 10+ heater, waterco multi cyclone 12, waterco trimline cartridge filter,waterco supastream 75 pump

Low pressure on heater

Postby Rossk » Sun 13 Sep, 2020 04:08

I have a eco 10+ heater, a skimmer feeds a waterco supastream 75 pump, before going into a waterco multi cyclone 12, into a waterco trimline cartridge filter and then into the heater. I have primed the pump, the cyclone is full and so is the cartridge filter, I have also bleed out both the cyclone and the filter.

The heater is still showing low pressure and the is almost no draw on the skimmer or output into the pool.

Can anyone suggest what else I need to do. I have checked for leaks and I can find none.

Any help would be appreciated .

Many thanks
Ross


Top
Denniswiseman
Pool Industry Leader
Pool Industry Leader
Posts: 2594
Joined: Tue 06 Sep, 2011 05:48
My Pool: 10k inground fibreglass, Telescopic Cover, Hayward Powerline pump, Quality filter with glass media, 27kw output heat pump, K-2006C test kit
Location: United Kingdom

Re: Low pressure on heater

Postby Denniswiseman » Mon 14 Sep, 2020 02:25

Had it worked OK before
Is it possible to bypass your filter and heater and just recirculate
Top
Post Reply

Return to “Pool Pumps, Filters, Plumbing & Piping”

Who is online at the Pool Help Forum

Users browsing this forum: Facebook [Bot] and 18 guests