Hi,
As I'm about to install a new Heat Pump, I need to relocate my existing Variable Speed Pump and Sand filter to accommodate new heat pump. As currently pump and filter are side by side.
My question is, is it ok to separate the pump and Sand filter( actually Glass media) by approx. 1.5m apart and pipes to go under ground and back up between the two so I don't close off my existing walk way?
appreciate your advise on this.
Installing pump and Filter further apart
-
- Pool Industry Leader
- Posts: 1206
- Joined: Thu 29 Apr, 2021 00:43
- My Pool: 12000 gallons vinyl liner,
Re: Installing pump and Filter further apart
Yes thats ok, try to make use of radius bends or two 45 bends rather than tight 90 knuckle bends.
I may not give you the answer you want to hear, but I will give an honest opinion of your situation as you decribe it.
-
- I'm new here
- Posts: 4
- Joined: Sun 03 Apr, 2022 22:39
- My Pool: 9m x 4m FG pool with Astral variable speed pump, Glass Media filter
Re: Installing pump and Filter further apart
Thank you Teapot1
Return to “Pool Pumps, Filters, Plumbing & Piping”
Who is online at the Pool Help Forum
Users browsing this forum: No registered users and 29 guests