three way ball valve 1.5" male threaded lines

[beanboy]

Greetings,

Pool company when closing took off the old failing three way ball valve (skimmer, bottom drain, pump filter basket). Two lines are 1.5" male threaded, the third uses 1.5" male adapter for the filter basket.

I'd prefer to use a 3-way ball valve that has slip threaded female connections so I don't have to cut/reinstall the L connectors. The valve is original, over 30 years old, so guessing the L-connectors were connected to the valve first, then glued into the feed lines.

Any ball valves with female slip connectors for a 1.5" male pipe or basic ideas on how I could avoid slicing off those connectors?

Thanks!

-B