Hayward Super II 1.5hp housing gasket leak
-
- I'm new here
- Posts: 3
- Joined: Fri 21 Jun, 2019 07:24
- My Pool: Inground pool is SWFL with solar and heat pump
Hayward Super II 1.5hp housing gasket leak
I have a leak (pic) between the seal plate and the housing. Go a go kit and replaced the shaft, diffuser and housing gaskets. Same problem. Took everything apart again, cleaned everything, replaced again with new seal, same problem. Tried different amount of torque on bolts. As I made small adjustments to each bolt leak moves to top/side but never full seals. Help!!
- Attachments
-
- IMG_4456.jpeg (41.18 KiB) Viewed 124 times
-
- Pool Industry Leader
- Posts: 2594
- Joined: Tue 06 Sep, 2011 05:48
- My Pool: 10k inground fibreglass, Telescopic Cover, Hayward Powerline pump, Quality filter with glass media, 27kw output heat pump, K-2006C test kit
- Location: United Kingdom
Re: Hayward Super II 1.5hp housing gasket leak
Normally leaks occur between the motor shaft seal
Return to “Pool Pumps, Filters, Plumbing & Piping”
Who is online at the Pool Help Forum
Users browsing this forum: No registered users and 31 guests