Greetings,
I have an 20x40 in-ground pool with a 24" sand filter. The filter is shooting sand back into the pool and I suspect the laterals have been damaged. the filter is old anyhow so I plan to replace it .
I found a very good deal on a used Jacuzzi laser 225 filter which supports 53 GPM and requires 250lbs of sand .
The pump I have is Franklin electric 3/4 hp with 346 RPMs . Thats all what I can read on it. The plumpbin into the pump is either 1.5" or 2" . I can double check that if needed
Can I use the Jacuzzi filter as a replacement ?
Thanks in advance for the help ,
Mark
replacing 24" sand filter with a smaller size filter
Why not remove your sand and replace the laterals in your old one. You would be buying a used filter anyways. You could keep the sand and reuse it. All you would need is new laterals and a filter cleaner/degreaser. Much cheaper.
APSP Certified Service Pro
Jandy Tech School
Pentair Tech Training
Raypak Heater School
5 yrs experience
Jandy Tech School
Pentair Tech Training
Raypak Heater School
5 yrs experience
Return to “Pool Pumps, Filters, Plumbing & Piping”
Who is online at the Pool Help Forum
Users browsing this forum: No registered users and 9 guests