I came home from work today and none of my jets were working. My filter pressure was at 0 and the pump was making a different noise than when running normaly. I turned it off and bumped the Hayward filter and turned it back on - no change
I tried to take the lid off of the filter baket to see if something was blocking the flow; it was nearly impossible to take off; I had to get a rubber hammer to turn it. The water inside was discolored.
I backwashed about a month ago and keep my pool ultra-clean. We are in FL and there have been some heavy winds and a few larger leaves were in the pool but the skimmer was relatively clean. We have a lanai so it's tough for debris to get in.
Does anyone have any idea what is going on? The filter and pump are not more than 2 years old. I'm really worried.
Please help - pump problem
-
- I'm new here
- Posts: 4
- Joined: Sat 19 Jul, 2008 18:03
- Location: Brandon, FL
pump
do you have a pool and a spa? turn it to spa see if it works. if it does there is a block in the inlet for the pool skimmeror dedicated line? prime it up with the hose if you have to
Return to “Pool Pumps, Filters, Plumbing & Piping”
Who is online at the Pool Help Forum
Users browsing this forum: No registered users and 28 guests