I have a two speed, 2 HP Hayward Pump 230 Volt. I'm trying to rewire but it doesn't seem to work. My problem is that
the wires coming from the panel are 2 blacks, 1 red and 1 green (ground). I don't know why I have 2 black wires
or where the second one goes. What I've read is that from the panel I should have 1 red, 1 black, and the ground. I
didn't note where the second black wire was so now I can't figure out where it goes. Any ideas? On the back of the terminal
board I have two wires, one white and one yellow.
Hayward Pump wiring
-
- Pool Industry Leader
- Posts: 2594
- Joined: Tue 06 Sep, 2011 05:48
- My Pool: 10k inground fibreglass, Telescopic Cover, Hayward Powerline pump, Quality filter with glass media, 27kw output heat pump, K-2006C test kit
- Location: United Kingdom
Re: Hayward Pump wiring
I suggest that you search here for your answer
http://www.troublefreepool.com/forums/1 ... ng-Station
http://www.troublefreepool.com/forums/1 ... ng-Station
-
- I'm new here
- Posts: 3
- Joined: Mon 05 Dec, 2016 19:39
- Contact:
Re: Hayward Pump wiring
What was that cable powering previously? If you use a voltmeter, what is live for colors and what voltage are you getting?
Commercial Pool Experts
http://www.poolweb.com
http://www.poolweb.com
Return to “Pool Equipment & Other Pool Maintenance”
Who is online at the Pool Help Forum
Users browsing this forum: No registered users and 17 guests