Greetings All from Sunny Florida!
When we bought this house less than a year ago, I had to learn pool care. It has been fun and I have learned a lot. The pool has a water feature, (two sided water fall). I have learned to switch from the water feature to the jets with lots of experimentation (and labels) Issue, the left water fall is stronger than the right in reference to water flow. At one point, I had it balanced but now for some reason the left is strong while the right is weak. I replaced the diverter and its still the same. If I put it on left only or right only, it is strong. Only when I try to balance it goes back to, left strong, right weak water flow. The pump is new and works well. Am I missing something? Any comments or suggestions are most appreciated.
George Evans
Lynn Haven, FL
Water Feature Issue
-
Bluesmokey
- I'm new here
- Posts: 1
- Joined: Fri 15 Sep, 2023 10:51
- My Pool: 11000 gallon in-ground pool with a water feature. Sand filtering. One skimmer and two return jets.
-
Teapot1
- Pool Industry Leader
- Posts: 1121
- Joined: Thu 29 Apr, 2021 00:43
- My Pool: 12000 gallons vinyl liner,
Re: Water Feature Issue
Without knowing how they are plumbed I couldnt even guess.
I may not give you the answer you want to hear, but I will give an honest opinion of your situation as you decribe it.
-
Denniswiseman
- Pool Industry Leader
- Posts: 2577
- Joined: Tue 06 Sep, 2011 05:48
- My Pool: 10k inground fibreglass, Telescopic Cover, Hayward Powerline pump, Quality filter with glass media, 27kw output heat pump, K-2006C test kit
- Location: United Kingdom
Re: Water Feature Issue
If it all worked OK before then a blockage could be the problem
Return to “Pool Equipment & Other Pool Maintenance”
Who is online at the Pool Help Forum
Users browsing this forum: CommonCrawl [Bot] and 0 guests