Hayward Salt System tripping Breaker
-
- I'm new here
- Posts: 1
- Joined: Mon 27 May, 2013 22:26
- My Pool: 28x14 Kidney Shape vinyl in-ground pool with Hayward Aquatrol Salt System and pump
- Location: Nashville, TN
Hayward Salt System tripping Breaker
My Hayward Salt System is tripping my breaker. The pumps works but the conltroller that operates the pump does not hence not allowing the system to chlorinate. We have replaced the breaker and tightened the connectors and it still trips. Please any suggestions?
Hayward Salt System tripping Breaker
DMurphy,
First thing I would do is make sure you have good power going into the unit. If that checks out, open up the control box (with the breakers off) and check for any blown fuses on the circuit board. If the fuses are OK, you might have a bad circuit board and will need to replace it.
-CG
First thing I would do is make sure you have good power going into the unit. If that checks out, open up the control box (with the breakers off) and check for any blown fuses on the circuit board. If the fuses are OK, you might have a bad circuit board and will need to replace it.
-CG
Return to “Pool Equipment & Other Pool Maintenance”
Who is online at the Pool Help Forum
Users browsing this forum: DotNetDotCom.org [Bot] and 19 guests