Jandy Filter Casing Closing Issues
Jandy Filter Casing Closing Issues
I am having trouble closing the filter casing after I clean the filter. Last year I was able to get the actually casing on easily but the black locking ring was tough to screw down. Now even the casing is tough to screw down even before I get to the the locking ring. Any advice? I do make sure the air tube is set properly and go counterclockwise first to make sure my threads are lined up. Thanks
Jandy Filter Casing Closing Issues
JB,
Could be a number of things. These 2 are common: Your tank o-ring could be bloated and needs to be replaced. Or, The surfaces of the top and bottom half of the tank where the o-ring sits can get pretty nasty, make sure they are very clean and lubed so that o-ring sits properly. Sometimes the collar gets worn out but this is rare.
-CG
Could be a number of things. These 2 are common: Your tank o-ring could be bloated and needs to be replaced. Or, The surfaces of the top and bottom half of the tank where the o-ring sits can get pretty nasty, make sure they are very clean and lubed so that o-ring sits properly. Sometimes the collar gets worn out but this is rare.
-CG
Return to “Pool Equipment & Other Pool Maintenance”
Who is online at the Pool Help Forum
Users browsing this forum: No registered users and 10 guests