hello,
I noticed I had some leaks at the front of the pvc piece going into the basket and the line going to the filter. This was causing air to show up in the basket. Is there a way to seal the leak at the fitting where it screws into the pump basket? I really don't want to cut apart and redo the whole thing and replace the valve because of the way its all glued together. thanks for any advice. Randy
p.s.
how would I attach a picture in here so people could see it?
repipe
-
- Pool Industry Leader
- Posts: 2594
- Joined: Tue 06 Sep, 2011 05:48
- My Pool: 10k inground fibreglass, Telescopic Cover, Hayward Powerline pump, Quality filter with glass media, 27kw output heat pump, K-2006C test kit
- Location: United Kingdom
Re: repipe
To insert an image
Click "Full Editor Preview"
Click "Img"
Place the link to the image in the middle or just drag and drop an image in the message box
Also there is an option below
"If you wish to attach one or more files enter the details below. You may also attach files by dragging and dropping them in the message box."
Click "Full Editor Preview"
Click "Img"
Place the link to the image in the middle or just drag and drop an image in the message box
Also there is an option below
"If you wish to attach one or more files enter the details below. You may also attach files by dragging and dropping them in the message box."
-
- Pool Enthusiast
- Posts: 11
- Joined: Mon 08 May, 2017 19:31
- My Pool: 18 x 36 inground vermiculite pool
Re: repipe
Thanks
Return to “Pool Equipment & Other Pool Maintenance”
Who is online at the Pool Help Forum
Users browsing this forum: No registered users and 3 guests