I have had a 15'x30' liner pool here in the UK for over 20 years. For many years I used the traditional bubble cover in the summer and the debris cover in the winter.
As time went on, and my garden became more mature (more leaves!), I grew tired of cleaning the pool before every swim and I wanted to extend the swimming season into the autumn.
The only answer seemed to be one of the ludicrously expensive array of mechanical and electrical covers on the market, until I hit upon this solution which uses both my existing covers simultaneously and which might be of interest to others who enjoy outdoor swimming but without the cost and palaver associated with the more expensive covers.
poolcoveroptimiser
Pool covers
-
- Pool Industry Leader
- Posts: 1337
- Joined: Tue 17 Oct, 2017 10:52
- My Pool: 12 x 24 (45m3) liner pool, Triton TR60 filter with AFM glass media (Activate) and variable speed pump running 0.08HP
- Location: UK
Re: Pool covers
Welcome and good luck with that, this forum doesn't seem to mind advertising (certainly at the moment). I am not sure what exactly you are selling? My neighbor has been leaving his bubble cover in over winter for years as he hasn't anywhere to store it.
-
- I'm new here
- Posts: 3
- Joined: Mon 13 Nov, 2017 01:34
- My Pool: 15ft by 30ft liner pool with Calorex heat pump
Re: Pool covers
Thanks teapot. What is new with the ''pool cover optimiser' is the easy tensioning, securring and releasing system allowing both covers to be pulled on and off in less than 3 minutes. The concept (which I believe is new), is shared free of charge here and on You Tube for those who want to use it. For those who need more help with materials and methodology there is the E-book manual.
I have been using the system for many years, but would welcome all comments from others and a discussion of the idea. Thank you for yours.
I have been using the system for many years, but would welcome all comments from others and a discussion of the idea. Thank you for yours.
-
- Pool Industry Leader
- Posts: 1337
- Joined: Tue 17 Oct, 2017 10:52
- My Pool: 12 x 24 (45m3) liner pool, Triton TR60 filter with AFM glass media (Activate) and variable speed pump running 0.08HP
- Location: UK
Re: Pool covers
Ok, The idea sounds fine, anything that helps owners handle their covers easier should be welcome. I will try and help promote it. My website is closed for a while but later I would be happy to add it with your blessing.
-
- I'm new here
- Posts: 3
- Joined: Mon 13 Nov, 2017 01:34
- My Pool: 15ft by 30ft liner pool with Calorex heat pump
Re: Pool covers
Many thanks for the encouragement, Teapot. You certainly have my blessing!
I really do believe this will help all pool owners who have winter and solar covers, and it is so cheap and simple!
I really do believe this will help all pool owners who have winter and solar covers, and it is so cheap and simple!
Return to “Pool Equipment & Other Pool Maintenance”
Who is online at the Pool Help Forum
Users browsing this forum: No registered users and 15 guests