Polaris 380 Completely Rebuilt Not cleaning whole pool

[CaptainDucky]

After rebuilding the whole cleaner part by part and changing the pool hose to correct length I no have a cleaner that likes to only clean one end of the pool. I have tried moving the thrust jet in all different locations (11, 10, 2, 4, 6, 5, 4.5, 9 on the clock dial) and nothing changes. There is no doubt that everything was put back together correctly and the new parts were exact fits on everything. I just, for the life of me, cannot get this thing to go back to its original patterns of doing the whole pool. I used to have the thrust jet in the 11 o'clock position, but that doesn't work anymore. Does anyone have any ideas as to what might be the problem?
The rpm is perfect, the hose perfect, the screen cleaned, the wall SWF perfect, the wheels perfect, et... Cannot seem to figure out why it won't glide across the bottom like it used to even though the hose was too long(always kinked itself, so that was reason for shortening it a touch)....

Thank you for the help of a newbie to the forum.

Captain Ducky