Help!!

[jlthla]

so I had a 220V 2 speed Century Pump connected to a Pantair 2 speed relay. I'm in the process of replacing the motor but sadly, I didn't make notes of which wire goes where. The relay has these connections listed:

Hi Low Com

and the 2 speed motor has
L1 L2 and A

trying to decide/remember which wire goes where. 99% sure the Low terminal on the relay goes to the "A" connector on the motor... but don't have a clue about the other two, and half way thinking it doesn't matter. But before I blow everything up, thought I'd try to get an answer.