Low Spa Jet Pressure

Automatic pool cleaners, vacuum heads, pool covers,
decks, fencing, pool alarms and security ....
walkermdr
I'm new here
I'm new here
Posts: 1
Joined: Sat 28 Mar, 2009 12:20
My Pool: Inground, w spa, Jandy EQ

Low Spa Jet Pressure

Postby walkermdr » Sat 28 Mar, 2009 13:32

Have inground pool & spa with Jandy eq. In spa mode, jets are very weak. In pool mode, jets are normal for pushing water over waterfall. Air blower will not push air through jets. Pressure on pool inlets is good. Jet Pressure is normal when filling spa after draining to pool. Status is the same after backwash and filter pressure gauge is 25lb. Any ideas.


Guest

Low Spa Jet Pressure

Postby Guest » Wed 01 Apr, 2009 17:39

The valves isolating the pool when you switch to spa mode are not shutting off?
vplannermom

Low Spa Jet Pressure

Postby vplannermom » Tue 05 May, 2009 17:08

Did you get an answer on this??? I have the exact same issue and need help!
bluecovepools
I'm new here
I'm new here
Posts: 1
Joined: Thu 19 Apr, 2012 13:09
Location: TX

Low Spa Jet Pressure

Postby bluecovepools » Thu 19 Apr, 2012 13:31

My inground spa jets are weak when in spa mode and only the filter pump is running. If I turn the blower on for about a minute and turn it off the jet pressure is a lot stronger with only the filter pump. Any ideas what could be causing this?

Return to “Pool Equipment & Other Pool Maintenance”

Who is online at the Pool Help Forum

Users browsing this forum: No registered users and 16 guests