Hi everyone.
First post here, We have a new pool with a Easy touch Pentair 8. I read that we have extra relays and wanted to know where there might be a diagram or instructions on how to connect up the extra relays? The instruction manual really isnt clear. There are relays in the board with the small Low Volt wires connected and we wanted to run some lights up in the trees (120V) off the remote. We currently have them wired to a 15A GFI breaker we added in the panel. I assume we can just run the Hot (BL) in and out of the relay, then program it to the remote?
Any help VERY much appreciated, we've done quite a few exaustive searches to no avail as yet.
Thanks and cheers
Watts
Pentair 8 Wiring/adding relays?
-
Driftwood1
- I'm new here
- Posts: 1
- Joined: Sat 25 Jul, 2009 13:52
- My Pool: 15000 gal traditional shaped quartz plaster with 7' spa, Pentair 8 One body of water
- Location: 78619
Return to “Pool Equipment & Other Pool Maintenance”
Who is online at the Pool Help Forum
Users browsing this forum: No registered users and 10 guests