Polaris Connection Problem

Stairs, skimmers, jets, drains, lighting, water features
and miscellaneous pool water fixtures and fittings.
Post Reply
rshaw5102029

Polaris Connection Problem

Postby rshaw5102029 » Fri 07 Apr, 2017 09:25

To connect our Polaris to our pool we simply do a 'push in and turn' movement to engage a small nipple into a slot. Somehow the nipple has been broken off. Is there any easy solution to get our Polaris attached to the existing permanent pool fitting? Thanks in advance for any solution suggestion. :idea:


Top
distjams
I'm new here
I'm new here
Posts: 2
Joined: Wed 19 Apr, 2017 09:34
My Pool: 18 x 36 in-ground pool with floating skimmers

Re: Polaris Connection Problem

Postby distjams » Thu 27 Apr, 2017 14:15

If it was done correctly originally the connector in the pool wall that is broken should be removable.
You would unscrew it and install a new one.
Attachments
polaris.JPG
polaris.JPG (23.42 KiB) Viewed 858 times
Top
MJCF
I'm new here
I'm new here
Posts: 1
Joined: Mon 25 May, 2020 20:18
My Pool: 20by 40. Use Polaris 380

Re: Polaris Connection Problem

Postby MJCF » Mon 25 May, 2020 20:33

My quick disconnect and universal wall fitting are stuck. I unscrewed the wall fitting so could remove unit out of pool. How do I get them to turn apart?
Top
Post Reply

Return to “Skimmers, Jets, Lighting & Other Pool Fixtures”

Who is online at the Pool Help Forum

Users browsing this forum: No registered users and 4 guests