Pool step gasket

Stairs, skimmers, jets, drains, lighting, water features
and miscellaneous pool water fixtures and fittings.
thrashj7
I'm new here
I'm new here
Posts: 1
Joined: Wed 17 May, 2017 08:47
My Pool: Inground Grecian, 16'6" x 35' 6", sand filter.

Pool step gasket

Postby thrashj7 » Wed 17 May, 2017 09:07

Just installed new inground liner, gasket kit i ordered is different than my original. Original had gasket under liner with plastic strip (with no gasket) on top of liner. New kit has plastic strips with a gasket attached, (came in 3 pieces).
1. Does this type strip need a gasket under liner?
2. Holes are not spaced same as old strips. New has holes 3" apart, old has holes 3 1/2" apart. Will this even work on my steps? Holes are not going to line up with holes in my steps.
3. Already filling pool, will i be able to put gasket behind liner if i use same type as original without too much trouble. I dont think using old gasket is a good option, its about 14 years old.
Thanks


Return to “Skimmers, Jets, Lighting & Other Pool Fixtures”

Who is online at the Pool Help Forum

Users browsing this forum: No registered users and 4 guests