Infinity Edge Pool possible problem
Infinity Edge Pool possible problem
We have an infinity edge pool and today we installed a timer on the pump so it wouldn't run 24 hours a day. After a couple of hours the pool water lever was down 3" below the edge and the catch tank which the water level is usually 12" below the top was overflowing. Im guessing this is a symptom of gravity but does this mean my pump needs to run 24 hours a day?
-
- Pool Industry Leader
- Posts: 2594
- Joined: Tue 06 Sep, 2011 05:48
- My Pool: 10k inground fibreglass, Telescopic Cover, Hayward Powerline pump, Quality filter with glass media, 27kw output heat pump, K-2006C test kit
- Location: United Kingdom
Re: Infinity Edge Pool possible problem
I would suspect that the catch tank is piped into the pool which will try to equalise levels
I would assume that it should only pull from the catch tank and then pump over into the pool
A check valve (non return) on the suction line from the catch tank should stop the pool water flowing back into the catch tank and overflowing
I would assume that it should only pull from the catch tank and then pump over into the pool
A check valve (non return) on the suction line from the catch tank should stop the pool water flowing back into the catch tank and overflowing
Return to “Skimmers, Jets, Lighting & Other Pool Fixtures”
Who is online at the Pool Help Forum
Users browsing this forum: No registered users and 6 guests