Need some help. When I turn my Hayward led light on for the first time it goes dim 15 seconds later and then starts to blink every few seconds. When I shut the light down for for 20 to 30 seconds and then turn it back on the light works as it should.
Any help is appreciated.
Sent from my SM-N960U using Tapatalk
Hayward pro logic led pool light goes dim and blinks
-
- Pool Industry Leader
- Posts: 2592
- Joined: Tue 06 Sep, 2011 05:48
- My Pool: 10k inground fibreglass, Telescopic Cover, Hayward Powerline pump, Quality filter with glass media, 27kw output heat pump, K-2006C test kit
- Location: United Kingdom
Re: Hayward pro logic led pool light goes dim and blinks
I don't know if this helps with your situation but I had dimmable LED's on a circuit in my house
If I put the lights on dimmed they would be OK but if I turn them up to full brightness they would flash for about three seconds and then go to full brightness
Contacting the makers of the dimmer they provided me with a load balancer (YAGF Glowfix) which corrected the problem
If I put the lights on dimmed they would be OK but if I turn them up to full brightness they would flash for about three seconds and then go to full brightness
Contacting the makers of the dimmer they provided me with a load balancer (YAGF Glowfix) which corrected the problem
Return to “Skimmers, Jets, Lighting & Other Pool Fixtures”
Who is online at the Pool Help Forum
Users browsing this forum: No registered users and 1 guest