Hayward H350IDL2 heater issues getting too hot

Electric heaters, gas heaters, heat pumps,
solar heaters, geothermal heating, solar pool
covers and wood-burning pool heating equipment.
Gregp
I'm new here
I'm new here
Posts: 2
Joined: Mon 16 Nov, 2020 22:05

Hayward H350IDL2 heater issues getting too hot

Postby Gregp » Mon 16 Nov, 2020 22:15

First I received an AO error indicating the blower vacuum switch is faulty or the blower.
The capacitor was bad, replaced that.
Replaced the blower vacuum switch.
Heater fires up still then gets an AO.
Took the cover off and noticed the port on the blower motor gets so hot it kinda melts the vavcc tube that leads to the blower switch.
Cut off the bad part and hooked it up.
Running fine for about 5 minutes, but then the unit made like a high rev sound, and still with the top cover off the heater I could see the starting of blue flames coming out the vent.
Turned off the heater and the gas and that’s where I’m at.

Hayward tech support is absolutely horrible, worse customer service. And all the pool guys will just want to sell me a new heater.

Any suggestions where to start?
Thanks


Denniswiseman
Pool Industry Leader
Pool Industry Leader
Posts: 1854
Joined: Tue 06 Sep, 2011 05:48
My Pool: 10k inground fibreglass, Telescopic Cover, Hayward Powerline pump, Quality filter with glass media, 27kw output heat pump, K-2006C test kit
Location: United Kingdom

Re: Hayward H350IDL2 heater issues getting too hot

Postby Denniswiseman » Tue 17 Nov, 2020 02:40

I would be inclined to talk to a gas service engineer
Most gas boilers/furnaces operate on the same principles

Return to “Solar & Pool Heaters”

Who is online at the Pool Help Forum

Users browsing this forum: Applebot [Bot], CommonCrawl [Bot] and 0 guests