Hello All,
I'm new to this forum, but have tried a few things discussed here.
I need help with my Pentair Minimax NT 400 which is only 4 years old.
Last week I noticed the heater display reads "ERR" I've looked in my book and all it says is, call tech if this message appears.
Unfortunately, I'm going thru a divorce and the ex got all of the money, so I don't have the money to call a tech.
I found a post on this forum (by Guru) from several months ago and tried what was suggested, but it didn't work.
So, my heater display reads "ERR", I've reset the main power, reset the power switch at the bottom of the power box inside the heater, checked all of the connections, checked the Thermo link and as suggested by Guru in the past, unplugged the Thermistor from the board. Nothing has worked.
I don't want to spend $350.00 on a new control board only to find out it was something else. Is there anything else I should be checking?
Any Suggestions?
Pool Heater Help
-
- Swimming Pool Wizard
- Posts: 72
- Joined: Sat 25 Jul, 2009 12:17
- My Pool: 15 x 40 ft inground fiberglass
- Location: Apple Valley, CA
Pool Heater Help
Sorry don't seem much help Shawn, perhaps wrong time of year. You might try again
-
- I'm new here
- Posts: 1
- Joined: Mon 22 Nov, 2010 10:57
- My Pool: Pool/Spa Aprox 40,000 Gal., All Pentair Equip
- Location: San Diego, Ca.
Pool Heater Help
Thank You for responding! I was wondering what the heck, but everyone is busy this week.
Again, Thanks!
Again, Thanks!
Pool Heater Help
that is the only way to fix you pool heater get a new power control display board.that is the only solution, good luck.go to watercrafters.com ask for manuel or jeff they can get what you need.
Return to “Solar & Pool Heaters”
Who is online at the Pool Help Forum
Users browsing this forum: No registered users and 13 guests