Solar heating system using a "Bladdder" valve?

Electric heaters, gas heaters, heat pumps,
solar heaters, geothermal heating, solar pool
covers and wood-burning pool heating equipment.
I'm new here
I'm new here
Posts: 1
Joined: Wed 24 Nov, 2010 16:05

Solar heating system using a "Bladdder" valve?

Postby rohmell » Wed 24 Nov, 2010 16:09

Hello to All.
I recently purchased a house with an inground pool. The previous owner did not take care of the pool solar heating system very well, so I am in the process of rebuilding it.

The pool has an automated roof solar water heating system using a three port thermostatic valve riveted to a black plastic cover on the roof that looks like a ported vacuum switch that used to be on older 70s-80s cars. There are also little brass nipples installed in the pvc tubing before and after the pool pump which seem to supply suction and pressure to operate the system. There is also a black rubber 'coupling' with a brass nipple which is secured with hose clamps on the output of the pump leading to the solar collectors.

When I removed the 'coupling' it turned out to be a type of valve that when pressure is applied to the nipple, it inflates three little bladders inside of it to stop the water flow through it. There is also a wall-mounted three port vacuum switch that had about 6 vacuum hoses coming out of it leading to the thermostatic switch on the roof and to the pressure and suction nipples on the PVC and to the bladder valve.

Unfortunately, all of the hoses were disconnected and the thermostatic switch is bad. Is anyone familiar with this type of system? Are there schematic diagrams available that show the hose routing? Are replacement parts available? I cannot find a manufacturer's name on any of the parts except for the solar collectors, which are Fafco. I tried to search for the valve online, but all I found were the regular Jandy valves, I could not find any info about this type of bladder valve.

Currently I have the the system connected in such a way that I am able to use the manual wall valve to apply either suction or pressure to the bladder valve to make the system operate, but I would like to restore the system to its original automated operation.

Any help would be appreciated.

Pool Heating Expert

Solar heating system using a "Bladdder" valve?

Postby Pool Heating Expert » Wed 08 Dec, 2010 14:30

Trash the entire control

Thank you

User avatar
Pool Clown
Swimming Pool Wizard
Swimming Pool Wizard
Posts: 88
Joined: Thu 10 Sep, 2009 00:15
My Pool: Uses a Chlorine generator, not a Salt Water Generator (SWG).
Location: Silicon Valley, CA

Solar heating system using a "Bladdder" valve?

Postby Pool Clown » Mon 28 Feb, 2011 12:34

Awesome advice!
Factory warranty service for Pentair, Jandy, Raypak, Polaris, and Paramount pool cleaning systems.

Return to “Solar & Pool Heaters”

Who is online at the Pool Help Forum

Users browsing this forum: Applebot [Bot], CommonCrawl [Bot] and 0 guests