Raypak not lighting
-
Shanon
- I'm new here
- Posts: 2
- Joined: Sat 28 May, 2022 15:50
- My Pool: 16’ above ground with sand filter and raypak heater 106
Raypak not lighting
I have a raypak 106 and this is the 3rd year we are using it. Turned everything on and it won’t light. I don’t get the clicking sounds when it try’s firing up. I installed a new roll out safety switch and still nothing. Checked propane valve, on, power, yes. Looking for ideas as to the problem. Thanks
-
Teapot1
- Pool Industry Leader
- Posts: 1206
- Joined: Thu 29 Apr, 2021 00:43
- My Pool: 12000 gallons vinyl liner,
Re: Raypak not lighting
The clicking sound is the igniter, how is that powered by batteries or the mains power. Really this is a boiler pros department, not really the area for diy
I may not give you the answer you want to hear, but I will give an honest opinion of your situation as you decribe it.
-
Denniswiseman
- Pool Industry Leader
- Posts: 2594
- Joined: Tue 06 Sep, 2011 05:48
- My Pool: 10k inground fibreglass, Telescopic Cover, Hayward Powerline pump, Quality filter with glass media, 27kw output heat pump, K-2006C test kit
- Location: United Kingdom
Re: Raypak not lighting
Any decent heating engineer should be able to diagnose it quickly as they all operate on the same basic principles
-
Shanon
- I'm new here
- Posts: 2
- Joined: Sat 28 May, 2022 15:50
- My Pool: 16’ above ground with sand filter and raypak heater 106
Re: Raypak not lighting
If this helps anyone in the future …. The heater will not ignited if there isn’t enough water pressure going through it. I adjusted the pressure and it started. I live rural so to get service, it takes a long time and is expensive.
Return to “Solar & Pool Heaters”
Who is online at the Pool Help Forum
Users browsing this forum: No registered users and 11 guests