Will Goldline temp sensor work with Jandy Aqualink RS?

Electric heaters, gas heaters, heat pumps,
solar heaters, geothermal heating, solar pool
covers and wood-burning pool heating equipment.
ze pres

Will Goldline temp sensor work with Jandy Aqualink RS?

Postby ze pres » Thu 10 Sep, 2009 13:44

Hi anyone knows if Goldline temperature sensor will work with Jandy Aqualink RS 6 Controller? The GL part is PC-10K.

Thanks


User avatar
Pool Clown
Swimming Pool Wizard
Swimming Pool Wizard
Posts: 88
Joined: Thu 10 Sep, 2009 00:15
My Pool: Uses a Chlorine generator, not a Salt Water Generator (SWG).
Location: Silicon Valley, CA

Will Goldline temp sensor work with Jandy Aqualink RS?

Postby Pool Clown » Sun 13 Sep, 2009 22:07

Are you asking because you have one? Hook it up and try it. You will get an accurate reading or you won't. You won't damage the RS6 by doing this. You will of course need an accurate temp reading of the water before you start to tell if the new sensor is working properly.
Factory warranty service for Pentair, Jandy, Raypak, Polaris, and Paramount pool cleaning systems.
ze pres

Will Goldline temp sensor work with Jandy Aqualink RS?

Postby ze pres » Mon 14 Sep, 2009 14:58

Thanks Pool Clown for the input. No I do have the Goldline sensor. I asked the question so I can decide if I should order the Gold Line replacement for my Jandy unit. I cannot return if it does not read accurately. I agree it wont break my controller since it's just a passive thermistor. The GL one is 10K Ohms and I have not been able to find the specification for the Jandy on.

Thanks
User avatar
Pool Clown
Swimming Pool Wizard
Swimming Pool Wizard
Posts: 88
Joined: Thu 10 Sep, 2009 00:15
My Pool: Uses a Chlorine generator, not a Salt Water Generator (SWG).
Location: Silicon Valley, CA

Will Goldline temp sensor work with Jandy Aqualink RS?

Postby Pool Clown » Tue 15 Sep, 2009 01:14

Factory warranty service for Pentair, Jandy, Raypak, Polaris, and Paramount pool cleaning systems.
luv2ski

Will Goldline temp sensor work with Jandy Aqualink RS?

Postby luv2ski » Wed 04 Nov, 2009 00:40

I have an Jandy Aqualink RS6 system. I just purchased two goldline sensors on ebay. Did some research first by calling Jandy tech support directly. They told me - no problem using Goldline / Hayward sensors as the specs are the same.

Installed sensors and tested. Both came within 2 degrees of actual temp over a range of temperatures. Have them installed now and working well.

Saved a bundle by buying the Goldline instead of the Jandy 7790 model. Hope they last.
User avatar
Pool Clown
Swimming Pool Wizard
Swimming Pool Wizard
Posts: 88
Joined: Thu 10 Sep, 2009 00:15
My Pool: Uses a Chlorine generator, not a Salt Water Generator (SWG).
Location: Silicon Valley, CA

Will Goldline temp sensor work with Jandy Aqualink RS?

Postby Pool Clown » Mon 09 Nov, 2009 22:57

You can also calibrate those from the panel in the house if they slip a little.
Factory warranty service for Pentair, Jandy, Raypak, Polaris, and Paramount pool cleaning systems.

Return to “Solar & Pool Heaters”

Who is online at the Pool Help Forum

Users browsing this forum: No registered users and 4 guests