Filter prining
-
- I'm new here
- Posts: 1
- Joined: Thu 19 May, 2022 21:15
- My Pool: Fiberglass in ground pool. 10,000 gallons. Hayward filter
Filter prining
When I go to prime my filter basket the water does not stay in the basket. It drains through the hose the draws the water from pool to filter. However, if I put a plug in the skimmer hole and then prime, the water stays and I have to have someone turn the filter power in at the same time I pull the plug and then the filter will suck and run properly. What is causing thst???
-
- Pool Industry Leader
- Posts: 2594
- Joined: Tue 06 Sep, 2011 05:48
- My Pool: 10k inground fibreglass, Telescopic Cover, Hayward Powerline pump, Quality filter with glass media, 27kw output heat pump, K-2006C test kit
- Location: United Kingdom
Re: Filter prining
Obviously the pool is lower than the pump basket and water seeks it's own level
If you plug the skimmer, fill and fit the pump basket lid on, then you should be able to unplug the skimmer and hold the water in
Failing that a non return valve on the suction side of the pump will hold prime
If you plug the skimmer, fill and fit the pump basket lid on, then you should be able to unplug the skimmer and hold the water in
Failing that a non return valve on the suction side of the pump will hold prime
-
- Pool Industry Leader
- Posts: 1203
- Joined: Thu 29 Apr, 2021 00:43
- My Pool: 12000 gallons vinyl liner,
Re: Filter prining
I second Dennis, fit a non return valve
I may not give you the answer you want to hear, but I will give an honest opinion of your situation as you decribe it.
Return to “Basics for New Pool Owners”
Who is online at the Pool Help Forum
Users browsing this forum: No registered users and 27 guests