Pool Light question

[JimW]

My pool light does not work the bulb is bad. The current light uses the small halogen bulb (250watts) Its a small light fixture, the lens measures about 3.5" in dia. and the outer flange measures a little over 6". I know the industry is moving away from these bulb types for many reasons and moving to an LED type light. I get that the LED type lights will require a housing upgrade as well which brings me to my question. What are my upgrade options limited too? can I buy a 10" led housing and fit that into my nitch? please help

[Teapot1]

You should find one to fit in old niches. Cant help more than that as what you may find on line or locally could well be different to what we would find especially not know the niche make or pictures.

[JimW]

So I need to figure out what model type niche is, then find a led housing that will fit that?

[Teapot1]

It would help, as would a picture if you can?

[JimW]

I will try to get a photo. I did confirm the current light fixture installed is a Hayward SP0590
Everything is Hayward so I assume to niche is a hayward as well

[Teapot1]

Ok thats a good start, I will try to take a look into my catalogues later.

[JimW]

here is the old light

[Teapot1]

Yes Jim there are direct LED replacements for the old halogen T4 lamps. At only 45 ish watts they are affordable to run and around 10x the life span.
https://images.app.goo.gl/6oqCeMngBCpW2s3X6

[Phil.c]

As this discussion is about lights, I have just noticed that my LED light has stopped working, I changed from bulb to LED many years ago because the voltage fluctuation meant bulbs didn't last that long, so, seeing as I will need a new light, any recommendations please?