New Pool Need Heat

The basics of swimming pool maintenance.
New swimming pool owner's questions.
Help getting started with daily pool care.

New Pool Need Heat

Postby rneally » Tue 20 Mar, 2012 00:06

The more I read the more confused I get. I’m trying to figure out what is the best option. The house I bought last year already has a pool but the gas heater that it came with is broken. I live in Southern California but I’m looking to extend the swim season a bit and even in the summer I would like to get the pool up a good 5 degrees. I’ve always heard gas heating is the least efficient and most expensive but now I hear they have better ones these days. Now I’ve just read something about a heat siphon? I read that heat pumps are only a about 300.00 a year to run but I’m not sure if even that’s true. Every site tells you something different as far as what the efficiency and running cost of each unit. Any ideas on a good brand for heater of choice would be very helpful too. There is just a lot of info out there and no real place with reviews. Thank you for your help.

I'm new here
I'm new here
Posts: 2
Joined: Mon 19 Mar, 2012 07:58
My Pool: 3m x 6m x 1.5m (7000 us Gals, 27,000L)
In ground, liner, sand filter.
Usually under 10 degrees C Brrrrrr. Fitting solar this year.
Location: Newbury, UK

New Pool Need Heat

Postby trenery » Wed 21 Mar, 2012 05:47

Is there a calculation to work out how much heat energy is needed to run a pool per cubic meter? (rough estimate)

Also, has anyone got experience with solar heating? I am thinking about adding a few solar tube heaters like these ... 0866070195

I am thinking of pumping pool water through them with a solar powered heating pump as then it will only pump hot water into the pool.

Even when it is below freezing outside these things still produce hot water but I am wondering if they produce anywhere near enough heat to warm to pool by 10 degrees C or so. And I have no idea how many would be needed to make it work.

Any ideas?



My pool has 27 cubic meters of water and we are in the UK so it's cold for 80% of the time.
Swimming Pool Wizard
Swimming Pool Wizard
Posts: 67
Joined: Wed 20 Jul, 2011 01:09
My Pool: 27,000 gal, pebble tec, all Pentair equipment; DE filter, 3/4 hp, 400k heater, Poolvergnuegen 4x Pool Cleaner
Location: santa barbara, ca

New Pool Need Heat

Postby cpo2go » Tue 22 May, 2012 15:01

I really like the Sta-Rite Max-E-Therm. Highly efficient, small design/footprint, easy to install and work on. You can discount most of the advertiser's claims for efficiency by about 5-10% but they are all pretty good these days, about 90% efficient.
Heat Pumps and Heat Siphons are good in some areas but I wouldn't recommend one to you here. It could be the greatest thing for you but I would need to know more about your secific location.
No worries, though, if you're only looking to bring your pool up 5 degrees or so, a properly sized heater and a simple pool blanket-style cover will keep you happy into October for not a lot of money. Obviously, there's the up-front cost of the heater but, operating costs won't be much and a blanket is about $200 depending on the size you need. The blanket will also save you money on water lost through evaporation.

As for the post following yours, there is a formula for calculating heater size:

Formula: Heater Output:

Pool Volume (gal.) x Temp Diff. X 8.33

Ex: 20,000 gal. pool that is 77 degrees and you want to
heat it to 83. It would be; 20,000 x 6 x 8.33 = 999,600. Thiss means that you would require a 1,000,000 BTU heater to get the pool up to temp in one hour.

Note: 1 BTU = 1 lb of water raised 1 degree F.

Note: 1 gal of water = 8.34 lbs.

To find heater input: Heater Output / Heater Efficiency

Ex: Heater output = 1,000,000 BTUs
Heater Efficiency = 80%

1,000,000 / .8 = 1,250,000BTUs (Heater Input)

I've just copied and pasted this from my blog and it's in American Standard measurements but doing a metric conversion is pretty basic. Use 1 gallon = 3.79 liters.
Pool and Spa Water Care Simplified.
Easy to use, fast results.
User avatar
Pool Care Proficient
Pool Care Proficient
Posts: 50
Joined: Thu 10 May, 2012 01:26
My Pool: Private pool with 3.7 × 7.3 m
Location: India

New Pool Need Heat

Postby rosalind » Mon 18 Jun, 2012 00:09

Solar energy is best to give heat to new pool. Gyration the solar cover out over the top of your pool. The cover should be impact the water, So that pool can efficiently can be heat.
Pool Enthusiast
Pool Enthusiast
Posts: 13
Joined: Thu 09 Aug, 2012 02:59

New Pool Need Heat

Postby preeti22 » Thu 25 Oct, 2012 07:41

Gas heating is the fastest and most economical way to heat your pool and spa. so go for gas heaters .Viron Gas heaters Heat on demand technology will save approximately 20% on operating costs over a conventional gas heater.
Pool Enthusiast
Pool Enthusiast
Posts: 12
Joined: Mon 23 Apr, 2012 09:45
My Pool: 18K gal, SWG, PebbleTec, solar & gas heat, Intelliflo VSD, Pentair cartridge, Jandy AquaLinks control system. Pool Pal for Android.
Location: SoCal

New Pool Need Heat

Postby pirateslovebacon » Fri 26 Oct, 2012 16:30

I have solar heating panels on my roof; in Southern California too.

During summer I'm able to keep my water 87 deg F and I only run my pumps for 4 hr a day. I love it.

Solar won't help after Sept.

We also have a gas heater, but it's primarily for the pool-attached spa. It's expensive to heat a 20K gal pool, so we rarely ever do.

Return to “Basics for New Pool Owners”

Who is online at the Pool Help Forum

Users browsing this forum: CommonCrawl [Bot] and 0 guests