So I thought I levelled the ground pretty well and I started to fill the pool last night. This morning I checked the water level in the 4 corners of the pool.
On one end, the water is as deep as 1ft and 11”
And on the other side it’s 9” and 10” deep.
Are there any suggestions on what I can do to level it in it’s current state? Will it be ok to leave it? I’ve currently stopped filling and await any advice you might have.
Thank you.
Bestway 24 x 12 pool setup
-
- Pool Industry Leader
- Posts: 2594
- Joined: Tue 06 Sep, 2011 05:48
- My Pool: 10k inground fibreglass, Telescopic Cover, Hayward Powerline pump, Quality filter with glass media, 27kw output heat pump, K-2006C test kit
- Location: United Kingdom
Re: Bestway 24 x 12 pool setup
Nothing beats leveling correctly with a spirit level, how did you level, by eye
How does it measure from the top to the water, if it's the same then you are 3 inches out of level and the water will have to be that lower
I would be inclined to start over
How does it measure from the top to the water, if it's the same then you are 3 inches out of level and the water will have to be that lower
I would be inclined to start over
Re: Bestway 24 x 12 pool setup
I got it to about 2 1/2 out.
Do you think this will be dangerous?
Do you think this will be dangerous?
-
- Pool Industry Leader
- Posts: 2594
- Joined: Tue 06 Sep, 2011 05:48
- My Pool: 10k inground fibreglass, Telescopic Cover, Hayward Powerline pump, Quality filter with glass media, 27kw output heat pump, K-2006C test kit
- Location: United Kingdom
Re: Bestway 24 x 12 pool setup
Friedgoat wrote:I got it to about 2 1/2 out.
Do you think this will be dangerous?
I don't think it would be dangerous probably unsightly and a bit lower
Return to “Liner & Above Ground Pools”
Who is online at the Pool Help Forum
Users browsing this forum: No registered users and 7 guests