New Pool and Living in a Very Hard Water Area

The basics of swimming pool maintenance.
New swimming pool owner's questions.
Help getting started with daily pool care.
Pool Care Proficient
Pool Care Proficient
Posts: 33
Joined: Tue 15 Jul, 2008 12:24

New Pool and Living in a Very Hard Water Area

Postby smcrea » Fri 08 Aug, 2008 17:46

We are getting a pool which will use a salt generator for the sanitizer.

The water in our area is extremely hard and WILL leave white calcium deposits.

When we fill the pool I was considering using a portable water softener to fill a % of the water volume in an attempt to lower the total hardness. (I understand that we need to aim at around 250ppm and no lower)

Would this be an OK thing to do? If so would the softened water effect my saline level?

Thanks for any advise!

Swimming Pool Superstar
Swimming Pool Superstar
Posts: 332
Joined: Fri 07 Mar, 2008 20:56
Location: Maryland

Postby muss08 » Sat 09 Aug, 2008 07:44

Yes that would be fine to do and the bare minimum calcium hardness you can go to is 150ppm for plaster pools and around 100 for vinyl lined pools. A lower calcium hardness level is better for salt water generators because it will slow the calcium buildup in the cell that produces the chlorine which will extend the life of the cell.
APSP Certified Service Pro
Jandy Tech School
Pentair Tech Training
Raypak Heater School
5 yrs experience

Return to “Basics for New Pool Owners”

Who is online at the Pool Help Forum

Users browsing this forum: CommonCrawl [Bot], Qwantify [Bot] and 0 guests