15x30 above ground pool

[chadwhitt]

IMG_4316 (200x149).jpg (47.73 KiB) Viewed 2699 times

IMG_4316 (200x149).jpg (47.73 KiB) Viewed 2699 times

IMG_4316 (200x149).jpg (47.73 KiB) Viewed 2699 times

I'm hoping buy these pictures someone can tell me what the smaller plates are for, I have 8 of them and 12 longer ones. I know where 10 of the longer ones go but not sure of the other 2, and I have no idea where the smaller ones go. I bought the pool used and do not have the instructions, also I don't know the make of the pool, any help with this would be awesome. The only number I got off the pool was the bottom and top plates, the # t2989

[chadwhitt]

also this pool does not have the pressure plates that I see with most pool set up....... really need help here

[chadwhitt]

135 ppl have veiwed this and have no clue about these plates ???

[CGPoolman]

Hi Chad,

I have no idea what those plates might be, but I'm going to take a couple of guesses.

My first guess was that these are some kind of support or mounting bracket for one of those handrail systems that goes around the top edge of the pool, but I think if that were the case all of the brackets would be the same size.

My next guess would be that since you have 8 short ones, these might go to the "kneebraces" that help support the pool wall on the long sides. You should have 4 on each side?

I did a quick Google search of the part number you posted and found a company called "Teddy Bear Pools". I was able to look at a few photos of their pools, but was unable to find a parts breakdown.

Sorry I can't be of more help to you on this one.

-CG

[chadwhitt]

Thanks for the reply

I have been on the website to and can't find this part either. Longside, do you mean the side with the buttresses ?

[chadwhitt]

Thanks for the reply

I have been on the website to and can't find this part either. Longside, do you mean the side with the buttresses ?

also i noiticed that there is 4 holes on this plate but only one hole was used on alll of them