rock and paver coping installation method?
rock and paver coping installation method?
What is the best way to install brick and rock coping around the perimeter of a steel wall vinyl liner pool with a top ledge of 5"? is there a method or type of mortar that should be used to bond to the top of the steel wall and how thick of a bed? Thanks for your help
-
- Swimming Pool Superstar
- Posts: 290
- Joined: Thu 23 Nov, 2006 17:23
- My Pool: one of them is 713,342 gallons
I look after lots and lots - Location: Perth, Western Australia
-
- Swimming Pool Superstar
- Posts: 290
- Joined: Thu 23 Nov, 2006 17:23
- My Pool: one of them is 713,342 gallons
I look after lots and lots - Location: Perth, Western Australia
talked to some masonry suppliers this weekend.... they say the method they like to use is screwing galvanized wire lath to the top of the steel wall and then using mortar to set the masonry coping.
Any feedback on which method is best or does it matter???
Also, has anyone utilized a wall cap such as Monmouth stone by Grinnell or Celtik 90 Wall caps as pool coping?? After stopping by various mason suppliers, this seemed like a possible alternative to bullnose pavers or stones.
thanks again!
Any feedback on which method is best or does it matter???
Also, has anyone utilized a wall cap such as Monmouth stone by Grinnell or Celtik 90 Wall caps as pool coping?? After stopping by various mason suppliers, this seemed like a possible alternative to bullnose pavers or stones.
thanks again!
-
- Swimming Pool Superstar
- Posts: 290
- Joined: Thu 23 Nov, 2006 17:23
- My Pool: one of them is 713,342 gallons
I look after lots and lots - Location: Perth, Western Australia
Return to “Building, Construction & Rebuilds”
Who is online at the Pool Help Forum
Users browsing this forum: No registered users and 16 guests