I installed my own pool, inground kidney, years ago.
Im replacing my liner now, I cannot remember if the skimmer gets a gasket against the wall or just one behind the face plate of the skimmer. Gasket is spx1085d My walls are polymer.
Also if I wanted to do away with my light and not cut it out is there a blank cover that would fill the hole?
thanks for your help
Gasket question
-
- I'm new here
- Posts: 3
- Joined: Thu 30 May, 2019 10:03
- My Pool: 14x28 kidney
-
- Pool Industry Leader
- Posts: 1337
- Joined: Tue 17 Oct, 2017 10:52
- My Pool: 12 x 24 (45m3) liner pool, Triton TR60 filter with AFM glass media (Activate) and variable speed pump running 0.08HP
- Location: UK
Re: Gasket question
Both normally unless some dime punching accountant has got his own way.
-
- I'm new here
- Posts: 3
- Joined: Thu 30 May, 2019 10:03
- My Pool: 14x28 kidney
Re: Gasket question
Also if I wanted to do away with my light and not cut it out is there a blank cover that would fill the hole?
-
- Pool Industry Leader
- Posts: 1337
- Joined: Tue 17 Oct, 2017 10:52
- My Pool: 12 x 24 (45m3) liner pool, Triton TR60 filter with AFM glass media (Activate) and variable speed pump running 0.08HP
- Location: UK
Re: Gasket question
That would depend on the light niche and manufacturer. Have you considered an LED version, actually affordable to run and last a lot longer.
-
- I'm new here
- Posts: 3
- Joined: Thu 30 May, 2019 10:03
- My Pool: 14x28 kidney
Re: Gasket question
my light niche is American standard chrome light 79200200 the gaskey set is Pentair 79200400 10 hole, soooo
does anyone make a cover to fill the hole or do I just make one from a aluminum stop sign and silicone it in place?
My light has had leaks before in the wiring conduit, just thought I would reduce one more spot that could leak again.
does anyone make a cover to fill the hole or do I just make one from a aluminum stop sign and silicone it in place?
My light has had leaks before in the wiring conduit, just thought I would reduce one more spot that could leak again.
-
- Pool Industry Leader
- Posts: 1337
- Joined: Tue 17 Oct, 2017 10:52
- My Pool: 12 x 24 (45m3) liner pool, Triton TR60 filter with AFM glass media (Activate) and variable speed pump running 0.08HP
- Location: UK
Re: Gasket question
Can't help on that being the other side of the pond. Just a warning about using aluminium near chlorinated water.
Return to “Building, Construction & Rebuilds”
Who is online at the Pool Help Forum
Users browsing this forum: No registered users and 16 guests