Hi
I recently contracted a company to build a pool for me, being that there are no regulations in my country for pool construction. You get a lot of issues.. My current dilemma is that I am building two pools next to each other, they were supposed to be connected with an opening in the bottom (about 1.5 meter by 2 meters)(4x6ft).
Now I am told that the overflow will not happen because of the difference in size (which i have accepted)
So the hole (opening) now needs to be covered up, rather than do block work (concrete) I decided i prefer an acrylic sheet between the two pools. But the factory for the acrylic sheet says they are concerned that the chemicals might erode the acrylic with time.
(My understanding is that acrylic is a material that Un recyclable, so how can it erode with time..
Please let me know, if anyone has feedback.. can the acrylic be affected with chlorine or other chemicals?
Thanks
Can the acrylic be affected by the chemicals in the pool
-
- Swimming Pool Superstar
- Posts: 290
- Joined: Thu 23 Nov, 2006 17:23
- My Pool: one of them is 713,342 gallons
I look after lots and lots - Location: Perth, Western Australia
Re: Can the acrylic be affected by the chemicals in the pool
I don't think acrylic is usually harmed by pool chemicals.
Spa pools were for a time fiberglass shells with acrylic vacuum formed over to form the surface.
It is also common to install acrylic as the see through walls on the ends of pools and similar.
Spa pools were for a time fiberglass shells with acrylic vacuum formed over to form the surface.
It is also common to install acrylic as the see through walls on the ends of pools and similar.
Return to “Building, Construction & Rebuilds”
Who is online at the Pool Help Forum
Users browsing this forum: No registered users and 7 guests