Fiberglass pool steps
-
- I'm new here
- Posts: 1
- Joined: Sat 19 Jun, 2010 15:31
- My Pool: Inground vinyl lined 16 32
- Location: Greemsboro, NC
Fiberglass pool steps
My pool steps are 31 years old and need replacing. Liner is out. Is this difficult to do? Or does anyone know someone who does this in the Greensboro, NC area?
Fiberglass pool steps
The steps can be refinished for under $400. if you do the work. No experience is needed but there is some labor involved. Check out swimmingpoolresurfacing.com/steps_vinyl_liner_pool.htm. They provide the material and instructions. They invented the "DIY restoration of vinyl liner pool steps" system more than 10 years ago. Contractors charge up to $10,000. for new steps that are no better than the steps you already have, after you restore them.
It's a little easier if the liner is out, but since your new liner must be in by now, you'll just have to use a drop cloth and be a little more careful. It sure beats spending between $5,000. and $10,000. for new steps. -Glassguy1.
It's a little easier if the liner is out, but since your new liner must be in by now, you'll just have to use a drop cloth and be a little more careful. It sure beats spending between $5,000. and $10,000. for new steps. -Glassguy1.
-
- Pool Enthusiast
- Posts: 12
- Joined: Thu 28 Apr, 2011 17:57
- My Pool: Designer and builder of fiberglass, vinyl liner, and concrete pools. My contractor page is chadehunt.com, my ebook is at http://swimmingpoolbuild.com
- Location: Louisville, KY
- Contact:
Fiberglass pool steps
If you can restore them then do that.
Replacing steps is a big deal. You have to cut them out and jackhammer concrete behind them. The cost would be very high.
Chad
Replacing steps is a big deal. You have to cut them out and jackhammer concrete behind them. The cost would be very high.
Chad
Return to “Building, Construction & Rebuilds”
Who is online at the Pool Help Forum
Users browsing this forum: No registered users and 20 guests