I bought this pool about 2 weeks ago and they did not have a saltwater system. I went ahead and filled it and waited for them to get a pump in. I just ran the filter. After a week, they still had no system so I ordered one. The water began to get cloudy and when the pump came in- I emptied the pool and started over.
I refilled the pool and added 110 pounds of Morton's ( non-iodized) Table salt- figured it to dissolve quicker than pellets. As soon as the salt hit the water, it became cloudy. I ran the filter pump for 24 hours and then ran the chlorine generator, hoping it would clear. After running the generator for the first 3 hour session-it didn't clear. The generator ran fine- no messages.
I have intex strips ( if anyone could tell me how to properly use them -how long in water etc- that'll help) and it seems that nothing matches up, seems all the readings would be off the chart. Again, this water was put in on Friday and the salt too. Algae or most of the answers should not be a problem.
I can take a sample to a pool store but before that thought I would ask here if this was normal. We have notoriously hard water here and I was just wondering if that was some sort of reaction with the salt and water. I realize this may not be enough info but wondered if anyone had seen this before.
New pool/water/salt
-
- I'm new here
- Posts: 2
- Joined: Sun 07 Jun, 2009 11:35
- My Pool: Intex Metal Frame
15 x 48"
Intex Saltwater System
Filter pump
New pool/water/salt
Please Please help!!!!
Who is online at the Pool Help Forum
Users browsing this forum: No registered users and 16 guests