Temperature sensor at pump and filter.
-
phoneman438fla
- I'm new here
- Posts: 1
- Joined: Tue 12 Apr, 2011 17:37
- My Pool: 35 16, 10 ft at deep end. 9 solar panels, Hayward DE filter.De
- Location: Port Richey, Fla.
Temperature sensor at pump and filter.
I have nine solar panels on the roof, and a Goldline Aqua collector with a Jandy valve actuator. There is a sensor on the roof attached to a panel. My problem is, when I replaced the pump and filter I forgot to remove the sensor at the pump and threw both away. The whole solar system has to be at least 12 or 15 years old.The sensor was a type that screwed into the female drain plug hole with the wire going to the control box. I can't find that type of sensor. Will the kinds available like the roof type attached to the filter work?
Return to “Problems & Suggestions for this Forum”
Who is online at the Pool Help Forum
Users browsing this forum: No registered users and 3 guests