How do I tell if the SWG cell has failed?

SWGs, salt water chlorine generators, chlorinators,
ozone generators, UV systems, . . .
ColVol
Pool Newbie
Pool Newbie
Posts: 2
Joined: Sat 19 Nov, 2011 23:25
Location: Sydney

How do I tell if the SWG cell has failed?

Postby ColVol » Sat 19 Nov, 2011 23:43

I have a Zodiac Clearwater LM2-24 salt water chlorinator, about 6 years old. The system is failing to produce chlorine, and showing only 2 (of 6) lights in the output indicator. Prior to posting I have super chlorinated the pool (max 2 lights), checked the salt level with Aquacheck test strips (7000ppm), and hit the box with a tree branch (like Basil Fawlty).
How do I tell if the cell has failed, or if the problem is in the control box?

Thanks, Colin


ColVol
Pool Newbie
Pool Newbie
Posts: 2
Joined: Sat 19 Nov, 2011 23:25
Location: Sydney

How do I tell if the SWG cell has failed?

Postby ColVol » Wed 30 Nov, 2011 21:23

Not answering my own question: replacing the cell has resulted in normal production of chlorine.
artist running
Pool Newbie
Pool Newbie
Posts: 1
Joined: Wed 23 May, 2012 18:04

How do I tell if the SWG cell has failed?

Postby artist running » Wed 23 May, 2012 18:15

I have a zodiak Clearwater system and I just opened my pool. The green led lights won't come on. The red No Flow light stays on as does the orange light in the chlorine output box. Please assist

Return to “Salt Water Chlorine Generators, Ozone, UV”

Who is online at the Pool Help Forum

Users browsing this forum: No registered users and 1 guest