It's an indoor pool 8m x 4m x 1.3m and full of water.
There's a pump and filter and heating unit.
But when I switch the pump on (it makes what I think is the right noise), no water flows out of the inlet.
There is a pressure meter on the filter which doesn't change.
What do I check?
Bought house with pool - filled it. Now what?
-
Spinball
- I'm new here
- Posts: 4
- Joined: Sun 18 Dec, 2011 14:31
- My Pool: 4m x 8m x 1.3m constant depth indoor pool
- Location: UK
Bought house with pool - filled it. Now what?
- Attachments
-
- 1.jpg (137.62 KiB) Viewed 970 times
-
- 3.jpg (113.55 KiB) Viewed 959 times
-
- 2.jpg (117.72 KiB) Viewed 958 times
-
zippy_gg
- I'm new here
- Posts: 3
- Joined: Fri 23 Dec, 2011 00:54
- My Pool: Old inground pool, not sure of the size because of the shape, 8ft at deepest end, attached spa. no heater (anymore), Hayward DE filter, Whisperflow pump about to be replaced with energy efficient variable speed.
- Location: Woodland Hills
Bought house with pool - filled it. Now what?
I would remove the clear cover on top of the pump and fill with water to prime the pump. Otherwise your pump may just be sucking air and eventually get damaged as it is not cooled by water running through it.
IHTH.
IHTH.
Return to “Basics for New Pool Owners”
Who is online at the Pool Help Forum
Users browsing this forum: DotNetDotCom.org [Bot] and 10 guests