What are the safety precautions of the solar panels?

Causes and cures for cloudy swimming pool water.
Milky pool water, white, pink, brown, purple, black cloudy water.
Pool Newbie
Pool Newbie
Posts: 2
Joined: Mon 20 Feb, 2012 01:50
My Pool: solar
Location: china

What are the safety precautions of the solar panels?

Postby lusil » Thu 08 Mar, 2012 03:39

Various news reports are saying that a Solar Panels system was responsible for at least two house fires in NSW. But detailed investigation has showed that the fire was caused by faulty wiring and not from factory defects of the panels themselves. The investigation clearly pinpoints that the fire was caused by human error during installation, and should not be blamed on the solar system itself.

Further investigation also shows that faults in Sydney were due to the DC circuit breakers not the system itself. An extensive Department of Fair Trading audit says the same thing, which was reinforced by along with professional solarelectricians.

In response to the rising public concern about safety, the federal government of Australia has launched a nationwide solar audit to evaluate both residential system and commercial systems. The audit will continue to be done on a regular basis to ensure safety in every green home. The auditors will assess every component of the system and check any potential hazards from the Solar Panels itself down to the length of the wiring and inverters.

The DC circuit breaker is used as an isolating device to disconnect the PV panels from the inverter as well as to isolate the solar cable (connecting the panels to the inverter) from the PV panels. The DC circuit breaker will not, under any circumstances, operate with load because the solar supply is one way only, from the PV modules to the inverter.

Therefore the only scenario whereby an incorrectly installed DC circuit breaker could present any risk, is where a person manually turns the DC breaker off while the inverter is operating at full power. Even under such conditions the probability of an incident is deemed to be very low.

If the shutdown procedures are followed correctly and the AC power is turned off first, the inverter will turn off and remove any current from the PV panel. This will not present any risk with a DC circuit breaker, even it is wired incorrectly.

Aside from doing this there are some other additional safety precautions that you can do;

Before installation it is best to have your current electrical wiring checked first along with your circuit breaker.
When you installers arrive ask to see their identification and accreditation number before they begin.
Upon delivery of the Solar Panels and its components you can make visual inspection of the system to ensure that everything looks in good order.
Check the installation before the installers leave and make sure everything looks neat and tidy, especially the wiring.
The installers should also explain to you clearly the way everything works with your system and demonstrate the correct shutdown procedures should you ever need to do so.

Though it is the installer's job to identify any potential problems, doing your part will triple the identification prowess. Always keep in mind that prevention is better than cure!

Pool Enthusiast
Pool Enthusiast
Posts: 22
Joined: Sat 10 Mar, 2012 01:52
Location: Sydney

What are the safety precautions of the solar panels?

Postby BudgetPoolCare » Sat 10 Mar, 2012 02:35

you are talking about electric solar panels for power... this is a pool forum...

Return to “Cloudy Pool Water”

Who is online at the Pool Help Forum

Users browsing this forum: Omgili [Bot] and 0 guests