Can someone please advise me what type of grease i need to use for the o'ring for the lid of my pump.
It has lots of little pieces of dirt in the housing unit of the O'ring and i am getting air bubbles through return jets, so i though i would clean the housing unit for the o'ring and put a fresh layer of grease on, but have no idea what grease to use.
Being a pool novice, am i doing the right thing.
Thank you
O'Rings Grease
O'Rings Grease
As a pool tech, I keep Boss 820 pool lube handy for most every o-ring application. It's a silicone based lube.
I also carry a more liquified version of silicone lube for sand filter spider gaskets and chlorinator o-rings.
Never use petroleum jelly as lube. If you use petroleum jelly, you might was well take a pair of scissors to your o-rings and cut them up into little pieces. Same principle, scissors just get the job done faster.
I also carry a more liquified version of silicone lube for sand filter spider gaskets and chlorinator o-rings.
Never use petroleum jelly as lube. If you use petroleum jelly, you might was well take a pair of scissors to your o-rings and cut them up into little pieces. Same principle, scissors just get the job done faster.
Return to “Routine Pool Cleaning & Maintenance”
Who is online at the Pool Help Forum
Users browsing this forum: Ahrefs [Bot] and 10 guests