Hayward Salt System tripping Breaker

Automatic pool cleaners, vacuum heads, pool covers,
decks, fencing, pool alarms and security ....
Pool Newbie
Pool Newbie
Posts: 1
Joined: Mon 27 May, 2013 22:26
My Pool: 28x14 Kidney Shape vinyl in-ground pool with Hayward Aquatrol Salt System and pump
Location: Nashville, TN

Hayward Salt System tripping Breaker

Postby dmurphy » Mon 27 May, 2013 22:37

My Hayward Salt System is tripping my breaker. The pumps works but the conltroller that operates the pump does not hence not allowing the system to chlorinate. We have replaced the breaker and tightened the connectors and it still trips. Please any suggestions? :(

Swimming Pool Pro
Swimming Pool Pro
Posts: 168
Joined: Sat 28 Apr, 2012 17:52
Location: Orlando FL

Hayward Salt System tripping Breaker

Postby CGPoolman » Tue 28 May, 2013 14:02


First thing I would do is make sure you have good power going into the unit. If that checks out, open up the control box (with the breakers off) and check for any blown fuses on the circuit board. If the fuses are OK, you might have a bad circuit board and will need to replace it.


Return to “Pool Equipment & Other Pool Maintenance”

Who is online at the Pool Help Forum

Users browsing this forum: No registered users and 1 guest