Intex CS20110 sand/salt pump won't turn on

Automatic pool cleaners, vacuum heads, pool covers,
decks, fencing, pool alarms and security ....
Pool Newbie
Pool Newbie
Posts: 1
Joined: Sat 28 May, 2016 10:36
My Pool: Coleman 18'x48" w/ intex CS20110 sand filter/saltwater chlorinator

Intex CS20110 sand/salt pump won't turn on

Postby eray1985 » Sat 28 May, 2016 10:51

i have an Intex CS20110 sand filter/ salt water chlorinator. The unit had problems with turning on when i got it. I would have to turn it on and off several times by testing and reseting the GFCI plug to get it to operate. I replaced the GFCI connector, and now the LED display will only flash for a brief second but will not stay on. I checked the switch for continuity and it shows to be good. I then checked voltage on the small board found 124 volts coming in and i believe the relay on that board is working because the 5VDC on the output wire going to the large control board. I called Intex ( They suck by the way. ) They don't sell replacement parts or perform repairs. They also will by no means release a wiring schematic. Has anyone had this problem with a similar unit? Can any of you offer some advice on how to find parts for the unit? Please help.

Thank you,

Return to “Pool Equipment & Other Pool Maintenance”

Who is online at the Pool Help Forum

Users browsing this forum: No registered users and 0 guests