AquaRite salinity reading higher than strip results

SWGs, salt water chlorine generators, chlorinators,
ozone generators, UV systems, . . .
Pool Newbie
Pool Newbie
Posts: 1
Joined: Sun 29 May, 2016 08:48
My Pool: saltwater, 30x14, 11k gal

AquaRite salinity reading higher than strip results

Postby sidebyrne7 » Sun 29 May, 2016 09:04

I have an AquaRite generator that reads 3300ppm. I tested the water using strips which resulted in 2800. Which is more reliable? What could be causing this?

I tried the calibration procedure for the AquaRite where you watch the instant salinity reading count down, but it stopped at 3300. These readings were taken after I cleaned the cell. I did confirm the aquarite is configured for my t cell.

Pool details:
Pool has been in service for 2 seasons, this is beginning of 3.
11,000 gallon
AquaRite generator
t-3 cell

Return to “Salt Water Chlorine Generators, Ozone, UV”

Who is online at the Pool Help Forum

Users browsing this forum: No registered users and 3 guests