Pool Plaster issues

Tile, mosaic, marbelite, Marcite, Marblesheen,
fiberglass, plaster, shotcrete, paint, epoxy coatings.
Use, care and repair of the various surfaces.
lmbbuilders
Pool Newbie
Pool Newbie
Posts: 2
Joined: Fri 14 Oct, 2016 10:23
My Pool: 16x32 gunite pool installed June 2015, Pentair variable speed pool pump, cartridge filters, 48" depth for the entire pool. Dolphin DX3 pool cleaner.

Pool Plaster issues

Postby lmbbuilders » Fri 14 Oct, 2016 10:31

Hows it going, Im new to this site and I'm having some issues with my pool. Its a 16x32 salt water generator gunite pool installed in June 2015 48" depth with Pentair equipment. I have a DX3 dolphin pool cleaner. I get my water tested regularly, but my Ph goes up very frequently. I have a ph meter installed and I keep it 7.3-7.8. My issue is, I just removed the bag from my dolphin cleaner and installed the cartridge kit and every week when I clean it, I have a pretty good amount of sandy material that is the same color as my plaster. My pool is a year old and im pretty sure this is not normal. As anyone heard of this problem or know what I could do? I'm not sure if this has been doing it as I use to have a bag on the cleaner. My gunite/plaster is Florida Stucco brand. Any advice or information is much appreciate, Thanks in advance.


Denniswiseman
Swimming Pool Superstar
Swimming Pool Superstar
Posts: 339
Joined: Tue 06 Sep, 2011 05:48
My Pool: 10k inground fibreglass, Telescopic Cover, Hayward Powerline pump, Quality filter with glass media, 27kw output heat pump, K-2006C test kit
Location: United Kingdom

Re: Pool Plaster issues

Postby Denniswiseman » Fri 14 Oct, 2016 10:49

What is the calcium hardness of your pool water, it may be taking the calcium out of the plaster
Check out Pool Maths for your levels
How do you test your water, pool stores and strips aren't that accurate

Return to “Pool Surface Discussions”

Who is online at the Pool Help Forum

Users browsing this forum: No registered users and 0 guests