Pool Wall Seam Location HELP!

Liner issues and problems installing or
maintaining above ground swimming pools.
I'm new here
I'm new here
Posts: 1
Joined: Mon 25 Jun, 2018 18:26
My Pool: 43 x 21 ft oval above ground, steel

Pool Wall Seam Location HELP!

Postby PoolObsessed » Mon 25 Jun, 2018 18:56

I am putting up an above ground 21x43 oval. I am told the pool joint (wall seam) MUST go on the curved portion. My contractor has put it on the first curved rail portion (about 2 ft from the straight edge). The manual says suggested is the 2nd or 3rd curved rail. Will this be OK. I have sand, and all the coves in now and don't want to move it. I am nervous about it. My builder reassures me (he's not a pool installer though but a good builder and knowledgeable about stuff). Someone needs to reassure me. thanks...Also can I put a double foam wall insulation before the liner or will it be too thick.

thanks ...this has sure been a project..almost there.

Return to “Liner & Above Ground Pools”

Who is online at the Pool Help Forum

Users browsing this forum: No registered users and 0 guests