Auto cleaner

Adding chemicals, vacuuming, backwashing,
brushing, filter care, filter cleaning, replacing
worn or broken pool parts
steq184
Pool Enthusiast
Pool Enthusiast
Posts: 15
Joined: Sun 04 Sep, 2005 14:08

Auto cleaner

Postby steq184 » Sat 19 Aug, 2006 06:26

Hello
I have an above ground pool and want to use an auto vacuum cleaner, at the moment I use the normal hand vacuum that I plug into the skimmer by using an adaptor.
Firstly I dont want to keep using the adaptor so could I cut in a T piece to the skimmers pipe and insert a tap so I can turn on and off the suction to the auto cleaner.
Secondly by using this tap and leaving the skimmer open would this reduce the suction on the auto cleaner?
Thanks for any advice on this matter.


kamkuda
Pool Care Proficient
Pool Care Proficient
Posts: 48
Joined: Wed 16 Aug, 2006 14:56

Postby kamkuda » Thu 07 Sep, 2006 05:51

I think I see what you are suggesting, FOr the Auto vac to work properly, you need to ensure you have full suction. Will adding this valve create a air gap as it pulls from both the skimmer and the vac. It may work but the T needs to be pretty low down., Atleast 2 feet

Return to “Routine Pool Cleaning & Maintenance”

Who is online at the Pool Help Forum

Users browsing this forum: No registered users and 1 guest