water coming out of backwash hose in filter position

Liner issues and problems installing or
maintaining above ground swimming pools.
heather t

water coming out of backwash hose in filter position

Postby heather t » Sun 27 May, 2007 16:27

water coming out of backwash hose in filter position


phils94850
Pool Newbie
Pool Newbie
Posts: 8
Joined: Sun 04 Mar, 2007 10:23

Postby phils94850 » Sun 27 May, 2007 21:15

heather,

i have the same problem and read on haywards website that the diverter gasket under the control valve needs replacing. thats what usually causes this problem. im gonna do mine tomorrow. you can try pushing down on the control valve handle to help wash debris that may be stuck in there if that doesnt fix it then you have to replace your gasket.
Guest

Postby Guest » Mon 11 Jun, 2007 16:05

phils94850 wrote:heather,

i have the same problem and read on haywards website that the diverter gasket under the control valve needs replacing. thats what usually causes this problem. im gonna do mine tomorrow. you can try pushing down on the control valve handle to help wash debris that may be stuck in there if that doesnt fix it then you have to replace your gasket.


Same here. Just found the subject in the Jacuzzi site that said that
the pressure gauge may have been put in without enough plumber's
tape or silicone caulk. I'll try that before I tear down the filter.

Gregg

Return to “Liner & Above Ground Pools”

Who is online at the Pool Help Forum

Users browsing this forum: No registered users and 0 guests