Liquid to Granular Chlorine Conversion

Chlorinating, maintaining the right chlorine levels,
chlorine problems. Dichlor, trichlor, cal hypo, bleach,
granules, chlorine pucks and chlorine sticks.
zigzagzogzegzug
I'm new here
I'm new here
Posts: 1
Joined: Tue 17 Dec, 2019 22:44
My Pool: 70 000L, pebble finish, chlorinated

Liquid to Granular Chlorine Conversion

Postby zigzagzogzegzug » Tue 17 Dec, 2019 22:49

When I had my water tested I was instructed to add one litre of chlorine to the pool; however, I only have access to Granular Chlorine (calcium hypo) and was wondering how much of that I should use in place of the 1L?


Denniswiseman
Pool Industry Leader
Pool Industry Leader
Posts: 1379
Joined: Tue 06 Sep, 2011 05:48
My Pool: 10k inground fibreglass, Telescopic Cover, Hayward Powerline pump, Quality filter with glass media, 27kw output heat pump, K-2006C test kit
Location: United Kingdom

Re: Liquid to Granular Chlorine Conversion

Postby Denniswiseman » Wed 18 Dec, 2019 03:15

To be told to add I litre of liquid chlorine is rubbish. It all depends on the strength of the chlorine, you can use plain bleach
use Pool Maths to determine what quantity of chemical to use
You really need to get yourself a decent FAS/DPD test kit (Taylor K2006c or TF Testkits TF100 in the states) to get accurate results as maintaining an appropiate shock level means testing quite often during the day

There should be instructions on the packet if you go for the calcium hypochlorite

Return to “Chlorine”

Who is online at the Pool Help Forum

Users browsing this forum: No registered users and 0 guests