please help

What is floc, clarifier, stabilizer, cyanuric acid,
algaecide, brightener, dichlor, sodium hypo,
sodium bisulfate, ....??
kimmerz

please help

Postby kimmerz » Tue 03 Jul, 2007 14:01

I have just set up my pool, and I'M not sure on what to put in it. I have put in the tablets and the shock like it says. on the yellow side it is just right but the red side it is low. how much of the ph - and ph+ do I put in it?? it is a 8,000 gallon pool. :? :? :?


Backglass
Swimming Pool Superstar
Swimming Pool Superstar
Posts: 727
Joined: Tue 29 May, 2007 09:02

Re: please help

Postby Backglass » Tue 03 Jul, 2007 14:06

kimmerz wrote:I have just set up my pool, and I'M not sure on what to put in it. I have put in the tablets and the shock like it says. on the yellow side it is just right but the red side it is low. how much of the ph - and ph+ do I put in it?? it is a 8,000 gallon pool. :? :? :?


Do you have a test kit? You will need to test your chlorine and ph...and then add chlorine or ph+/- to get where you want to be. If the water is clear, you want around 3.0 for chlorine and 7.2-7.4 for ph. How much it takes depends on the stuff you have...depends on the concentrations. Check out the label for the correct dosage.

Return to “Pool Chemical Problems & Swimming Pool Chemicals”

Who is online at the Pool Help Forum

Users browsing this forum: No registered users and 0 guests